Makita HR3210C 230 V Combination Hammer
In suitcase
Makita Dealer Warranty, Click Here.
230V Combi hammer
Lots of power and equipped with slip clutch making this combi hammer also suitable for diamond core drills up to 80mm.
Ideale SDS-PLUS combihamer voor gaten tot 20 mm, maar kan tot 32 mm in beton. Laag trillingsniveau door actieve Anti Vibratie Technologie (AVT). Tot 50% sneller werken dankzij Smart Impact Technologie. Constante slag- en draaikracht, ook bij zware belasting. Voorzien van (veiligheids)slipkoppeling tegen vastslaan. Grote D-handgreep is verstelbaar in meerdere posities. Voorzien van instelbare slagkracht voor breken. Led-indicatie waarschuwt tijdig voor preventief onderhoud of koolborstelslijtage. Slagstop voorkomt stukslaan van boorhouder: slagmechanisme slaat pas onder belasting.
Leverbaar met twee verwisselbare boorkoppen (SDS-PLUS en snelspan)(HR3210FCT).
Version: In case
Afmeting: 398x114x239
Geluidsdrukniveau LpA: 91
Geluidsvermogenniveau LWA: 102
Gewicht EPTA: 5,2
Uncertainty K LpA: 3
Uncertainty K LwA: 3
Opgenomen vermogen: 850
Var. speed control rotary knob: 1
Constant speed: Yes
Safety slip clutch: Yes
Aansluiting/opname: SDS-PLUS
Toerental onbelast stand 1: 315 - 630
Vibration K drilling in metal: 1.5
Vibration ah drilling in metal: 2.5
Aantal instelbare beitelstanden: 24
Slagkracht EPTA: 5,0
Vibratie K hamerboren in beton: 1,5
Vibratie ah hamerboren in beton: 9,0
Vibratie K beitelen met zijhandgreep: 1,5
Vibratie ah beitelen met zijhandgreep: 9,6
Price sensitivity: C
Basis model: HR3210C
Ideale SDS-PLUS combihamer voor gaten tot 20 mm, maar kan tot 32 mm in beton. Laag trillingsniveau door actieve Anti Vibratie Technologie (AVT). Tot 50% sneller werken dankzij Smart Impact Technologie. Constante slag- en draaikracht, ook bij zware belasting. Voorzien van (veiligheids)slipkoppeling tegen vastslaan. Grote D-handgreep is verstelbaar in meerdere posities. Voorzien van instelbare slagkracht voor breken. Led-indicatie waarschuwt tijdig voor preventief onderhoud of koolborstelslijtage. Slagstop voorkomt stukslaan van boorhouder: slagmechanisme slaat pas onder belasting.
Leverbaar met twee verwisselbare boorkoppen (SDS-PLUS en snelspan)(HR3210FCT).
| EAN barcode | 0088381088718 |
|---|---|
| Included accessories | 135197-7, 181573-3, 321248-4, 824825-6 |
| Softstart | yes |
| Softgrip | yes |
| Cable length | 4,0 |
| Battery Platform | 230 v |
| Diameter concrete drill bit | 4 - 32 mm |
| logistic_width | 591 MM |
| logistic_height | 436 MM |
| logistic_weight | 10.558 KG |
Parts cannot be returned. Parts are usually shipped within 2 days.
| Part number | Item no. | Name | Price, excluding VAT | Price, incl. VAT | Add to Cart |
|---|---|---|---|---|---|
| 002* | 286282-0 | Chisel holder cap Hr3210Fct | € 1,57 | € 1,57 € 1,90 | |
| 003* | 233940-9 | Makita 233940-9 - Borgring 19 Hr2440/50 A | € 1,11 | € 1,11 € 1,34 | |
| 004 | 450245-4 | Chisel block cap Hr3210Fct | € 2,66 | € 2,66 € 3,22 | |
| 005 | 257288-5 | Ring 21 Hk1820 | € 9,23 | € 9,23 € 11,17 | |
| 006* | 216022-2 | Makita 216022-2 - Stalen Kogel 7.0 Hr2400 | € 0,95 | € 0,95 € 1,15 | |
| 007* | 345873-7 | Guide Hk1820 | € 2,24 | € 2,24 € 2,71 | |
| 008 | 234049-0 | Pressure spring 22-32 Hr3210Fct | € 0,95 | € 0,95 € 1,15 | |
| 018 | 922341-3 | Hex bolt M6X25 | € 0,95 | € 0,95 € 1,15 | |
| 019 | 158533-0 | Cylinder Cpl Hr3210Fct | € 37,68 | € 37,68 € 45,59 | |
| 020 | 213656-2 | O-Ring 53 | € 1,32 | € 1,32 € 1,60 | |
| 021 | 267810-0 | Revet 34 Hr3210Fct | € 5,70 | € 5,70 € 6,90 | |
| 022 | 262138-1 | Urethane Ring 34 Hr3210Fct | € 1,57 | € 1,57 € 1,90 | |
| 023 | 267810-0 | Revet 34 Hr3210Fct | € 5,70 | € 5,70 € 6,90 | |
| 024 | 324840-5 | Makita 324840-5 - Beitelhouder Hr3210C | € 39,65 | € 39,65 € 47,98 | |
| 025 | 324849-7 | Makita 324849-7 - Slagbout Hr3210C | € 7,28 | € 7,28 € 8,81 | |
| 026* | 213228-3 | O-Ring 15 Hr3000C | € 0,95 | € 0,95 € 1,15 | |
| 027* | 213228-3 | O-Ring 15 Hr3000C | € 0,95 | € 0,95 € 1,15 | |
| 028* | 213321-3 | Fluoride Ring 20 Hr3000C | € 8,13 | € 8,13 € 9,84 | |
| 029 | 424062-8 | Rubber Ring 13 Hr3210Fct | € 6,43 | € 6,43 € 7,78 | |
| 030 | 324838-2 | Slide plate Hr3210Fct | € 2,36 | € 2,36 € 2,86 | |
| 031 | 268226-2 | Makita 268226-2 - Pen 6 Hk1820 | € 1,42 | € 1,42 € 1,72 | |
| 032 | 331794-9 | Cylinder Hr3210Fct | € 179,73 | € 179,73 € 217,47 | |
| 033 | 450243-8 | Guide bushing Hr3210Fct | € 2,36 | € 2,36 € 2,86 | |
| 034 | 331805-0 | Ring 29 Hr3210Fct | € 10,88 | € 10,88 € 13,16 | |
| 035 | 267360-5 | Washer 40 Hr3210Fct | € 1,97 | € 1,97 € 2,38 | |
| 036 | 234052-1 | Pressure spring 42 Hr3210Fct | € 2,36 | € 2,36 € 2,86 | |
| 037 | 450236-5 | Blocking bushing Hr3210Fct | € 2,27 | € 2,27 € 2,75 | |
| 038 | 234050-5 | Pressure spring 34 Hr3210Fct | € 1,39 | € 1,39 € 1,68 | |
| 039 | 331795-7 | Bus Hr3210Fct | € 28,30 | € 28,30 € 34,24 | |
| 040 | 213434-0 | O-Ring 26 Bss610 | € 0,95 | € 0,95 € 1,15 | |
| 041 | 324858-6 | Impact bolt Hr3210Fct | € 5,01 | € 5,01 € 6,06 | |
| 042* | 213283-5 | O-Ring 18 Hk1820 | € 1,88 | € 1,88 € 2,27 | |
| 043* | 213283-5 | O-Ring 18 Hk1820 | € 1,88 | € 1,88 € 2,27 | |
| 044 | 256087-2 | Pen 7 Hk1820 | € 0,95 | € 0,95 € 1,15 | |
| 045 | 324918-4 | Piston Hr3210Fct | € 19,14 | € 19,14 € 23,16 | |
| 046* | 213262-3 | O-Ring 18 | € 1,11 | € 1,11 € 1,34 | |
| 047 | 450235-7 | Connecting rod Hr3210Fct | € 3,51 | € 3,51 € 4,25 | |
| 048 | 227531-6 | Gear 37 Hr3210Fct | € 37,68 | € 37,68 € 45,59 | |
| 049 | 345867-2 | Connection arm Hr3210Fct | € 6,43 | € 6,43 € 7,78 | |
| 050 | 213030-4 | O-Ring 8 Rp0910 | € 0,95 | € 0,95 € 1,15 | |
| 051 | 450248-8 | Pipe holder Hr3210Fct | € 2,27 | € 2,27 € 2,75 | |
| 052 | 213030-4 | O-Ring 8 Rp0910 | € 0,95 | € 0,95 € 1,15 | |
| 053 | 450239-9 | Spring guide Hr3210Fct | € 0,95 | € 0,95 € 1,15 | |
| 054 | 234048-2 | Pressure spring 10 Hr3210Fct | € 1,12 | € 1,12 € 1,36 | |
| 055 | 213275-4 | O-Ring 18 Hm0871C | € 0,95 | € 0,95 € 1,15 | |
| 056 | 331800-0 | Bus Hr3210Fct | € 6,43 | € 6,43 € 7,78 | |
| 057 | 213275-4 | O-Ring 18 Hm0871C | € 0,95 | € 0,95 € 1,15 | |
| 058 | 324862-5 | Balance weight Hr3210Fct | € 13,32 | € 13,32 € 16,12 | |
| 059 | 234048-2 | Pressure spring 10 Hr3210Fct | € 1,12 | € 1,12 € 1,36 | |
| 060 | 450239-9 | Spring guide Hr3210Fct | € 0,95 | € 0,95 € 1,15 | |
| 061 | 213030-4 | O-Ring 8 Rp0910 | € 0,95 | € 0,95 € 1,15 | |
| 062 | 450248-8 | Pipe holder Hr3210Fct | € 2,27 | € 2,27 € 2,75 | |
| 063 | 213030-4 | O-Ring 8 Rp0910 | € 0,95 | € 0,95 € 1,15 | |
| 064 | 266041-8 | Tapping screw 5X25 A | € 0,95 | € 0,95 € 1,15 | |
| 065 | 922123-3 | Hex bolt Dcs230T | € 0,95 | € 0,95 € 1,15 | |
| 066 | 450254-3 | Crankshaft housing cover Hr3210Fct | € 11,81 | € 11,81 € 14,29 | |
| 068 | 318201-9 | Crankshaft Housing Cap Hr3210Fct | € 11,81 | € 11,81 € 14,29 | |
| 069 | 265995-6 | Makita 265995-6 - Tapping screw 4X18 P | € 0,95 | € 0,95 € 1,15 | |
| 070 | 450249-6 | Adjustment knob Hr3210Fct | € 3,51 | € 3,51 € 4,25 | |
| 071 | 233436-0 | Pressure spring 3 Hr4011C | € 0,95 | € 0,95 € 1,15 | |
| 072 | 450250-1 | Lock button Hr3210Fct | € 2,27 | € 2,27 € 2,75 | |
| 073 | 911526-6 | Makita 911526-6 - Screw 4X16 A | € 0,95 | € 0,95 € 1,15 | |
| 074 | 450241-2 | Oil cover Hr3210Fct | € 3,98 | € 3,98 € 4,82 | |
| 075 | 213223-3 | O-Ring 16 For 9036 | € 0,95 | € 0,95 € 1,15 | |
| 076 | 158437-6 | Gear 33 Hr3210Fct | € 2,27 | € 2,27 € 2,75 | |
| 077 | 424064-4 | Gasket ring B Hr3210Fct | € 1,12 | € 1,12 € 1,36 | |
| 078 | 345868-0 | Connection plate Hr3210Fct | € 1,65 | € 1,65 € 2,00 | |
| 079 | 453866-1 | Air pipe Hr3210Fct A | € 2,27 | € 2,27 € 2,75 | |
| 080 | 263005-3 | Makita 263005-3 Rubber Pen 6 AC320H P | € 0,95 | € 0,95 € 1,15 | |
| 081 | 452126-8 | Gear shaft Hr3210Fct A | € 2,66 | € 2,66 € 3,22 | |
| 081A | 213083-3 | O-Ring 9 Hr3210C | € 1,88 | € 1,88 € 2,27 | |
| 082 | 158712-0 | Crankshaft housing Hr3541Fc A | € 63,61 | € 63,61 € 76,97 | |
| 083 | 443138-2 | Makita 443138-2 - Filter Hr3210Fct | € 0,95 | € 0,95 € 1,15 | |
| 084 | 213030-4 | O-Ring 8 Rp0910 | € 0,95 | € 0,95 € 1,15 | |
| 085 | 450238-1 | Filter cap Hr3210Fct | € 1,15 | € 1,15 € 1,39 | |
| 086 | 450244-6 | Gear Hr3210Fct | € 1,88 | € 1,88 € 2,27 | |
| 087A | 213223-3 | O-Ring 16 For 9036 | € 0,95 | € 0,95 € 1,15 | |
| 087B | 213176-6 | Makita 213176-6 - O-Ring 14 Hm1214C | € 0,95 | € 0,95 € 1,15 | |
| 088 | 450237-3 | Cap Holder Hr3210Fct | € 1,57 | € 1,57 € 1,90 | |
| 090 | 324839-0 | Crankshaft Hr3210Fct | € 11,81 | € 11,81 € 14,29 | |
| 091 | 211332-2 | Makita 211332-2 - Kogellager 6004Llu Hr4010C A | € 7,18 | € 7,18 € 8,69 | |
| 092 | 961060-6 | Locking ring S-20 | € 0,95 | € 0,95 € 1,15 | |
| 093 | 231991-6 | Conical Pressure Spring 21-31 | € 0,95 | € 0,95 € 1,15 | |
| 094 | 254239-9 | Insert 4 Hr4013C | € 1,11 | € 1,11 € 1,34 | |
| 095 | 324848-9 | Clutch Hr3210Fct | € 5,97 | € 5,97 € 7,22 | |
| 096 | 227188-3 | Gear 33 Hr3210Fct | € 15,71 | € 15,71 € 19,01 | |
| 097 | 253197-6 | Washer 10 | € 0,95 | € 0,95 € 1,15 | |
| 098 | 961036-3 | Lock washer Wr10 Hr3210Fct | € 0,95 | € 0,95 € 1,15 | |
| 099 | 345869-8 | Komring 18 Hr3210Fct | € 1,57 | € 1,57 € 1,90 | |
| 100 | 424063-6 | Gasket ring A Hr3210Fct | € 1,12 | € 1,12 € 1,36 | |
| 101 | 158534-8 | Gear housing Hr3210Fct | € 19,21 | € 19,21 € 23,24 | |
| 102 | 213415-4 | O-Ring 28 | € 0,95 | € 0,95 € 1,15 | |
| 103 | 227533-2 | Gear 9 Hr3210Fct | € 16,96 | € 16,96 € 20,52 | |
| 104 | 254239-9 | Insert 4 Hr4013C | € 1,11 | € 1,11 € 1,34 | |
| 105 | 211138-8 | Ball bearing 6001Llu | € 5,01 | € 5,01 € 6,06 | |
| 106 | 125421-6 | Torque limiter Hr3210Fct | € 63,61 | € 63,61 € 76,97 | |
| 107 | 257291-6 | Ring 10 Hr3210Fct | € 1,32 | € 1,32 € 1,60 | |
| 108 | 210005-4 | Makita 210005-4 - Ball bearing 608Ddw A | € 5,01 | € 5,01 € 6,06 | |
| 109 | 450251-9 | Filling plate Hr3210Fct | € 2,67 | € 2,67 € 3,23 | |
| 112 | 211138-8 | Ball bearing 6001Llu | € 5,01 | € 5,01 € 6,06 | |
| 113 | 253084-9 | Washer 12 | € 0,95 | € 0,95 € 1,15 | |
| 114 | 241863-7 | Range 70 Jr3020 | € 8,13 | € 8,13 € 9,84 | |
| 115 | 513748-0 | Anchor Hr3210Fct | € 78,15 | € 78,15 € 94,56 | |
| 116 | 681650-6 | Insulation ring Hr4000C | € 5,70 | € 5,70 € 6,90 | |
| 117 | 210005-4 | Makita 210005-4 - Ball bearing 608Ddw A | € 5,01 | € 5,01 € 6,06 | |
| 118 | 266037-9 | Makita 266037-9 - Met.Schroef M5X45 A | € 0,95 | € 0,95 € 1,15 | |
| 119 | 625813-4 | Field Hr3210Fct | € 51,26 | € 51,26 € 62,02 | |
| 120 | 450252-7 | Makita 450252-7 - Motorhuis Hr2811C | € 20,03 | € 20,03 € 24,24 | |
| 122* | 194160-9 | Carbon brush set Cb-350 Hr4010C | € 5,76 | € 5,76 € 6,97 | |
| 123 | 450253-5 | Engine cover Hr3210Fct | € 6,72 | € 6,72 € 8,13 | |
| 124 | 265995-6 | Makita 265995-6 - Tapping screw 4X18 P | € 0,95 | € 0,95 € 1,15 | |
| 125 | 265995-6 | Makita 265995-6 - Tapping screw 4X18 P | € 0,95 | € 0,95 € 1,15 | |
| 126 | 638519-5 | Carbon brush retainer.Hr3210Fct P | € 9,23 | € 9,23 € 11,17 | |
| 127 | 631784-5 | Makita 631784-5 - Toerenregelaar Hr3210C | € 57,02 | € 57,02 € 68,99 | |
| 129 | 638406-8 | Wire harness Hr4011C | € 1,97 | € 1,97 € 2,38 | |
| 130 | 450246-2 | Cable Clamp Hr3210Fct | € 2,27 | € 2,27 € 2,75 | |
| 132 | 687169-3 | Strain relief Hp1621 | € 0,95 | € 0,95 € 1,15 | |
| 134 | 450240-4 | Lens Hr3210Fct | € 1,57 | € 1,57 € 1,90 | |
| 135 | 682560-0 | Cable grommet 10 | € 1,88 | € 1,88 € 2,27 | |
| 136 | 695123-3 | Makita 695123-3 - Power cord 2X1.50 4.0Mtr A | € 25,87 | € 25,87 € 31,30 | |
| 137 | 266041-8 | Tapping screw 5X25 A | € 0,95 | € 0,95 € 1,15 | |
| 138 | 266041-8 | Tapping screw 5X25 A | € 0,95 | € 0,95 € 1,15 | |
| 139 | 450352-3 | Collar bushing 6 HR3210F A | € 0,95 | € 0,95 € 1,15 | |
| 141 | 911233-1 | Makita 911233-1 - Phillips screw 5X20 | € 0,95 | € 0,95 € 1,15 | |
| 142 | 266211-9 | Makita 266211-9 - Tapschroef 5X40Mm | € 0,95 | € 0,95 € 1,15 | |
| 143 | 267066-5 | Washer 5 Hr4011C | € 0,95 | € 0,95 € 1,15 | |
| 144 | 234051-3 | Pressure spring 11 Hr3210Fct | € 1,11 | € 1,11 € 1,34 | |
| 145 | 450255-1 | Handle base Hr3210Fct | € 16,97 | € 16,97 € 20,53 | |
| 146 | 419014-2 | Dust sealing plate Hr4011C | € 2,66 | € 2,66 € 3,22 | |
| 147 | 421912-8 | Dust seal Hr4011C | € 5,01 | € 5,01 € 6,06 | |
| 148 | 450256-9 | Handle Hr3210Fct | € 9,67 | € 9,67 € 11,70 | |
| 149 | 419025-7 | Switch knob Hr4011C | € 4,18 | € 4,19 € 5,07 | |
| 150 | 154626-1 | Switch Holder Hr4010C | € 2,79 | € 2,79 € 3,38 | |
| 151 | 650567-4 | SWITCH HR4010C P | € 8,05 | € 8,05 € 9,74 | |
| 152 | 450257-7 | Handle cover Hr3210Fct | € 15,71 | € 15,71 € 19,01 | |
| 153 | 265995-6 | Makita 265995-6 - Tapping screw 4X18 P | € 0,95 | € 0,95 € 1,15 | |
Makita 181573-3 Drilling and chiseling grease 100ml tubeIn stockConsulting price € 5,45 € 4,10 € 4,96- Makita 198993-4 Drilling and chiseling grease 100ml dispenserIn stockConsulting price € 9,68 € 7,28 € 8,81
-
- Makita B-11271 Hole saw 19mm bi-metal quick changeIn stockConsulting price € 19,36 € 13,12 € 15,88
- Makita B-11293 Hole saw 22mm bi-metal quick changeIn stockConsulting price € 19,66 € 13,33 € 16,13
- Makita B-11302 hole saw 24mm bi-metal quick changeIn stockConsulting price € 19,97 € 13,53 € 16,37
- Makita B-11324 hole saw 29mm bi-metal quick changeIn stockConsulting price € 19,97 € 13,53 € 16,37
- Makita B-11330 Hole saw 30mm bi-metal quick changeIn stockConsulting price € 19,97 € 13,53 € 16,37
- Makita B-11346 Hole saw 32mm bi-metal quick changeIn stockConsulting price € 21,78 € 14,76 € 17,86
- Makita B-11352 hole saw 35mm bi-metal quick changeIn stockConsulting price € 21,78 € 14,76 € 17,86
- Makita B-11368 Hole saw 38mm bi-metal quick changeIn stockConsulting price € 21,78 € 14,76 € 17,86
- Makita B-11380 Hole saw 44mm bi-metal quick changeIn stockConsulting price € 26,32 € 17,84 € 21,59
-
-
-
- Makita B-16586 P4S:SDS-PLUS drill bit 12x160mm 10sIn stockConsulting price € 114,65 € 77,70 € 94,02
-
- Makita B-46492-10 P2S: SDS-PLUS drill bit 5x110mm10pcsIn stockConsulting price € 46,28 € 31,37 € 37,96
-
- Makita B-46501-10 P2S: SDS-PLUS drill bit 5x160mm10pcsIn stockConsulting price € 52,33 € 35,47 € 42,92
-
- Makita 181573-3 Drilling and chiseling grease 100ml tubeIn stockConsulting price € 5,45 € 4,10 € 4,96
-
-
With this product we recommend:
Select items to add them to the basket or
